For a landlord in Stansted Mountfitchet the job is the same as anywhere in the Uttlesford area: check every appliance and flue, test the pipework, issue the certificate. What is local is the very hard water at 364 ppm, which shortens boiler life without a yearly service, and a housing stock that is 79% mains gas. Our engineers are about 50 minutes away.
A Landlord Gas Safety Certificate, still known as a CP12, is the record of the annual gas safety check the law requires on every gas appliance and flue a landlord provides in a rented property. It must be renewed every 12 months, a copy given to existing tenants within 28 days of the check and to new tenants before they move in, and records kept for two years.
Our Gas Safe registered engineer inspects each appliance, checks the flue and ventilation, tests the pipework for tightness, checks burner pressure and gas rate, tests the safety devices and issues the certificate, emailed to you and, if you want, to your agent. Any defects are listed with a price to put them right.
We work with private landlords and letting agents across Essex. Ask for our landlord rate for a one-off certificate, or take Plan 3 at £12.99 a month, which includes the annual boiler service, the annual certificate, priority call-out and warranty management. Landlords with several properties should ask us about a multi-property rate.
- Drive from base
- 36.9 miabout 50 minutes
- Homes on mains gas
- 79%2021 Census
- Water hardness
- 364 ppmVery hard water
- Gas Safety Certificate (CP12)
- Landlord ratesPrice agreed first
Landlord Gas Safety Certificates (CP12) in Stansted Mountfitchet: the local picture
79% of the 3,837 households around Stansted Mountfitchet heat with mains gas only, 6% are electric only and 3% run on oil (2021 Census, ward level).
Water in the Stansted Mountfitchet area is very hard at around 364 ppm, so limescale in boilers, cylinders and showers is a common cause of faults here.
Stansted Mountfitchet is 36.9 miles from our base in Bowers Gifford, about 50 minutes by van.
What is included
- Inspection of every gas appliance you supply
- Flue and ventilation check
- Gas tightness test on the pipework
- Burner pressure and gas rate check
- Safety device test on each appliance
- Written CP12 certificate emailed to you and your agent
- Reminder before the next certificate is due
- Boiler service on the same visit if you want it
How it works
- Book the visit and tell us how many appliances there are
- Arrange access with your tenant or agent
- Test each appliance, the flue and the pipework
- Issue the certificate and list any defects
- Quote for any remedial work needed
Recent work
What Stansted Mountfitchet customers say
Joshua FoxGoogle review★★★★★Essex Heating Engineers installed a new boiler for me in Rayleigh, and they were excellent from start to finish. The team was punctual, tidy, and really professional. The installation was quick, everything was explained clearly, and the new boiler works per...
Darren DeaconGoogle review★★★★★Ash arrived on time, gave us his advice and explained how we should proceed. His quote was reasonable and when we get his email we will arrange a time for the installation of a new thermostat. They covered our floors, so they didn't track anything in. They ...
Jack CoreyGoogle review★★★★★Essex Heating Engineers is my go-to company. They always do a great job. Dean was especially knowledgeable, efficient and dedicated. Getting my house back in working order after a leak in the upstairs bath was problematical, to say the least. But Dean did w...
Questions about landlord gas safety certificates (cp12) in Stansted Mountfitchet
How much does a gas safety certificate cost?
We do not publish a single price because it depends on the number of appliances. Ask for our landlord rate when you call. Plan 3 at £12.99 a month, including VAT, covers the annual certificate and the annual boiler service on a 12-month minimum term, and we offer a rate for landlords with several properties.
How quickly can you arrange a gas safety check?
Call 01268 855605 with the property address and the tenant's or agent's contact details and we will book the earliest visit that works for access. If the current certificate is about to run out, tell us and we will prioritise it. The check can be done up to two months before the expiry date without losing the anniversary date.
What does the gas safety check cover?
Every gas appliance the landlord supplies, including the boiler, cooker, hob, fire and water heater, plus the flues and the pipework. The engineer checks the appliance is safe to operate, the flue is clearing combustion products, ventilation is adequate and the pipework holds pressure. Appliances the tenant owns are not included unless you ask.
What happens if an appliance fails?
The engineer records the defect on the certificate and classifies it. An appliance that is immediately dangerous is disconnected with your and the tenant's knowledge. We quote for the repair or replacement, and once the work is done the certificate is updated.
How far is Stansted Mountfitchet from you?
Stansted Mountfitchet is 36.9 miles from our base in Bowers Gifford, about 50 minutes by van. Installations, servicing, landlord certificates and planned work. Typical drive time about 50 minutes, so we book these in advance.
Other services in Stansted Mountfitchet
- Boiler Servicing
- Emergency Gas Engineer 24/7
- Gas Cooker and Hob Installation
- Gas Pipework and Gas Leaks
- All services in Stansted Mountfitchet
Landlord Gas Safety Certificates (CP12) near Stansted Mountfitchet
See the full Landlord Gas Safety Certificates (CP12) page for everything we cover across Essex.

