A new bathroom is a plumbing job first. Where the waste runs, whether the shower has enough pressure, how the hot water reaches the far end of the house and where the towel rail connects to the heating all decide whether the finished room works. We fit bathrooms, en suites and shower rooms across Essex, from a like-for-like replacement to a full refit with the room re-planned.
We survey the room and the existing services, plan the layout with you, quote in writing and then do all the plumbing: hot and cold supplies, wastes and soil pipe, bath, shower, toilet, basin, towel rail and any pipework alterations. We work alongside your tiler and electrician, or can recommend trades we have worked with, and we test every outlet before the room is handed back.
Because we are heating engineers as well as plumbers, we sort out the water pressure, the cylinder or combi capacity and the towel rail connection at the same time. Essex water is hard to very hard, so we also talk about limescale protection for the new shower. Quoted after a free survey.
What is included
- Survey and layout planning
- Hot and cold supply pipework
- Wastes, traps and soil pipe connections
- Bath, shower, toilet and basin installation
- Shower pumps, mixer valves and thermostatic showers
- Heated towel rails connected to the heating
- Water pressure and hot water capacity check
- Testing of every outlet before handover
How it works
- Survey the room and the existing pipework
- Plan the layout with you and quote in writing
- Strip out and run the new pipework and wastes
- Fit the sanitaryware and towel rail after tiling
- Test every outlet and hand over
Recent work
Bathroom Installation near you
Choose your town for local arrival times, the homes we see there and recent jobs.
- Benfleet
- Basildon
- Canvey Island
- Corringham
- Hadleigh
- Rayleigh
- Stanford-le-Hope
- Wickford
- Billericay
- Hockley
- Leigh-on-Sea
- South Woodham Ferrers
- Aveley
- Brentwood
- Chelmsford
- Grays
- Rochford
- South Ockendon
- Southend-on-Sea
- Tilbury
- Maldon
- Purfleet-on-Thames
- Witham
- Burnham-on-Crouch
- Chipping Ongar
- Braintree
- Great Dunmow
- Waltham Abbey
- Chigwell
- Epping
- Harlow
- Loughton
- Buckhurst Hill
- Colchester
- Halstead
- West Mersea
- Wivenhoe
- Manningtree
- Brightlingsea
- Clacton-on-Sea
What customers say
Matt HarringtonGoogle review★★★★★I called Essex Heating Engineers after I bled my radiators and then the heating would no longer come on. I hadn’t used them before and found them on google. From the moment I called they were great - it’s peak season but they found time to come and diagnose...
Grace MacdonaldGoogle review★★★★★We noticed our boiler was leaking late at night and contacted these guys, they turned up the very next morning. Liam fixed it temporarily to keep us going while waiting for a new part, then Ash came back two days later and sorted it properly. Fantastic serv...
Natalie CatinoGoogle review★★★★★I first used Essex Heating Engineers as an emergency call out on a Sunday for my children’s nursery. They came out within the hour and dealt with the issue immediately. They then followed up the next day to do some further investigation as to why the boiler...
Questions about bathroom installation
How much does a new bathroom cost?
It depends on the layout, whether the sanitaryware stays in the same positions, the quality of the fittings and how much pipework changes, so we quote after a free survey. A like-for-like swap is the cheapest option; moving the toilet or shower costs more because the waste and soil pipe have to move with it.
How quickly can you start?
Call 01268 855605 and we will book the survey. A start date is agreed when you accept the quote and the fittings are on order, and the engineer will tell you how long your bathroom will take when they have seen the room and the plan.
Do you supply the bathroom suite?
We fit suites you have chosen from a retailer or showroom, and we can advise on what will work with your water pressure and pipework before you buy. If you would like us to source the fittings, ask and we will tell you what we can do.
Will my shower have enough pressure?
That depends on whether you have a combi, a gravity-fed cylinder or an unvented cylinder, and on your mains pressure. We measure it during the survey. A gravity system may need a shower pump, and a combi needs a shower matched to its flow rate. We tell you before you buy the shower.
Do you do the tiling and electrics as well?
We do all the plumbing and heating work. Tiling and electrical work are done by your own trades or by tradespeople we have worked with and can recommend. We sequence the plumbing so the first fix is done before tiling and the sanitaryware goes in afterwards.
How do I stop limescale ruining the new shower?
Essex water is hard to very hard, with a county average of around 317 ppm, and a new shower screen and head show it within weeks. A water softener on the incoming main protects the whole house, and a scale reducer on the shower feed is a cheaper partial measure. We can fit either while the bathroom is being done.

