A full central heating installation means a new boiler, radiators, pipework and controls designed together for the house, rather than a boiler bolted onto whatever was there before. It is the right job for a home with no gas central heating, a system that has reached the end of its life, or an extension and refurbishment that changes how the house is heated.
We start with a room-by-room heat loss calculation, size each radiator to its room, plan the pipe routes, and specify the boiler, cylinder if needed and controls to match. You get a written quote for the whole job. On site the pipework and radiators go in first, then the boiler, then the system is flushed, dosed with inhibitor, commissioned and balanced so every radiator heats evenly.
Essex Heating Engineers has designed and installed heating systems across the county for more than 40 years. We are Gas Safe registered (925538), a Baxi Approved Installer and also fit Worcester Bosch, Vaillant, Ideal and Glow-worm. Every installation is notified under the Building Regulations and the boiler warranty is registered for you.
What is included
- Room-by-room heat loss calculation
- Radiator sizing and positioning
- Boiler, cylinder and controls specified for the house
- All pipework, valves and fittings
- Programmer, room thermostat or smart thermostat and TRVs
- Flushing, inhibitor and magnetic filter
- Commissioning, balancing and Building Regulations certificate
- Manufacturer warranty registration
How it works
- Survey the house and calculate the heat loss
- Design the system and quote in writing
- Install pipework and radiators first, then the boiler
- Commission, balance and test every radiator
- Register the warranty and hand over the paperwork
Brands we fit and repair
- BaxiApproved Installer
- Worcester Bosch
- Vaillant
- Ideal
- Glow-worm
Recent work
Central Heating Installation near you
Choose your town for local arrival times, the homes we see there and recent jobs.
- Benfleet
- Basildon
- Canvey Island
- Corringham
- Hadleigh
- Rayleigh
- Stanford-le-Hope
- Wickford
- Billericay
- Hockley
- Leigh-on-Sea
- South Woodham Ferrers
- Aveley
- Brentwood
- Chelmsford
- Grays
- Rochford
- South Ockendon
- Southend-on-Sea
- Tilbury
- Maldon
- Purfleet-on-Thames
- Witham
- Burnham-on-Crouch
- Chipping Ongar
- Braintree
- Great Dunmow
- Waltham Abbey
- Chigwell
- Epping
- Harlow
- Loughton
- Buckhurst Hill
- Colchester
- Halstead
- West Mersea
- Wivenhoe
- Manningtree
- Brightlingsea
- Clacton-on-Sea
What customers say
Matt HarringtonGoogle review★★★★★I called Essex Heating Engineers after I bled my radiators and then the heating would no longer come on. I hadn’t used them before and found them on google. From the moment I called they were great - it’s peak season but they found time to come and diagnose...
Grace MacdonaldGoogle review★★★★★We noticed our boiler was leaking late at night and contacted these guys, they turned up the very next morning. Liam fixed it temporarily to keep us going while waiting for a new part, then Ash came back two days later and sorted it properly. Fantastic serv...
Natalie CatinoGoogle review★★★★★I first used Essex Heating Engineers as an emergency call out on a Sunday for my children’s nursery. They came out within the hour and dealt with the issue immediately. They then followed up the next day to do some further investigation as to why the boiler...
Questions about central heating installation
How much does a new central heating system cost?
It depends on the size of the house, the number of radiators, whether a cylinder is needed and how much pipework has to be run, so we quote after a free survey. The boiler element starts from £1,980 fitted and the rest is itemised in the written quote so you can see where the money goes.
How quickly can you install it?
Call 01268 855605 and we will book the survey at a time that suits you. The installation date is agreed when you accept the quote, and the engineer will tell you how many days the job will take for your house when they have seen it.
How disruptive is a full installation?
Pipework has to run under floors and through walls, so carpets and floorboards are lifted in the rooms the pipes pass through and put back afterwards. We plan the routes to keep this to a minimum and tell you before we start which rooms are affected on which days.
Do I need a hot water cylinder?
Not always. A combi boiler heats water on demand and suits homes with one bathroom and reasonable mains pressure. Homes with two or more bathrooms in use at the same time usually do better with a system boiler and a cylinder. The survey looks at your water pressure and how many people use hot water at once.
Can you add heating to an extension or loft conversion?
Yes. We check whether the existing boiler and pipework can carry the extra radiators or underfloor heating, and either extend the system or recommend upgrading it. Involving us at the planning stage means the pipe runs go in before the floors and walls are closed.
Does hard water matter for a new system?
Yes. Essex water is hard to very hard, with a county average of around 317 ppm, and scale forms in the boiler and cylinder from the first fill. We recommend a scale reducer or water softener on the incoming main with any new system, and we can fit it as part of the installation.

