Radiator work in Southend-on-Sea often follows a kitchen or bathroom refit, when a radiator needs moving or a towel rail adding. We are about 20 minutes away and used to the housing across the Southend-on-Sea area, where 78% of homes have gas central heating running on very hard water at about 314 ppm.
Radiators wear out, rust through at the bottom, end up in the wrong place after a kitchen refit, or were never big enough for the room in the first place. We replace, add and move radiators across Essex, and fit the thermostatic and lockshield valves that let you control each room separately.
For a replacement we size the new radiator to the room's heat loss, not just the space on the wall, and choose the type you want: standard panels, vertical or column radiators, designer models or heated towel rails. We drain down or freeze the pipework, fit the radiator and valves, refill, bleed and balance the system so the new radiator heats at the same rate as the rest.
We are heating engineers, not fitters, so a radiator job includes a look at why the old one failed and whether the system needs a flush or inhibitor. Prices are quoted before we start, and we have been doing this in Essex for more than 40 years.
- Drive from base
- 10.7 miabout 20 minutes
- Homes on mains gas
- 78%2021 Census
- Water hardness
- 314 ppmVery hard water
- Radiator Fitting
- Fixed quotesPrice agreed first
Radiators and Radiator Valves in Southend-on-Sea: the local picture
78% of the 78,341 households around Southend-on-Sea heat with mains gas only, 10% are electric only (2021 Census, district level).
Water in the Southend-on-Sea area is very hard at around 314 ppm, so limescale in boilers, cylinders and showers is a common cause of faults here.
Southend-on-Sea is 10.7 miles from our base in Bowers Gifford, about 20 minutes by van.
What is included
- New radiators sized for the room
- Replacing rusty, leaking or undersized radiators
- Moving radiators for kitchens, bathrooms and extensions
- Thermostatic radiator valves (TRVs) and lockshields
- Towel rails, column and designer radiators
- Bleeding, balancing and airlock removal
- Radiator flush for cold spots
- Pipework alterations in copper or plastic
How it works
- Measure the room and agree the radiator type and size
- Quote for the radiator, valves and any pipework
- Drain down or freeze the pipework and fit the radiator
- Refill, bleed and balance the system
- Check the boiler pressure and inhibitor level
Recent work
What Southend-on-Sea customers say
Joshua FoxGoogle review★★★★★Essex Heating Engineers installed a new boiler for me in Rayleigh, and they were excellent from start to finish. The team was punctual, tidy, and really professional. The installation was quick, everything was explained clearly, and the new boiler works per...
Darren DeaconGoogle review★★★★★Ash arrived on time, gave us his advice and explained how we should proceed. His quote was reasonable and when we get his email we will arrange a time for the installation of a new thermostat. They covered our floors, so they didn't track anything in. They ...
Jack CoreyGoogle review★★★★★Essex Heating Engineers is my go-to company. They always do a great job. Dean was especially knowledgeable, efficient and dedicated. Getting my house back in working order after a leak in the upstairs bath was problematical, to say the least. But Dean did w...
Questions about radiators and radiator valves in Southend-on-Sea
How much does it cost to replace a radiator?
It depends on the size and type of radiator and whether the pipework needs altering, so we quote before we start. A straight swap onto existing pipework is the simplest job. Moving a radiator or fitting a designer model with new pipework costs more, and the quote sets it all out.
How quickly can you fit a radiator?
Radiator work is planned, so call 01268 855605 and we will book a date that suits you, allowing time for the radiator to be supplied if we are sourcing it. A leaking radiator that needs isolating is treated as a repair and prioritised.
What size radiator do I need?
The size depends on the room's heat loss, which comes from its floor area, ceiling height, windows, outside walls and insulation. A radiator that is too small never brings the room up to temperature, and one that is too large wastes money. We calculate it rather than guess from the old one.
Are thermostatic radiator valves worth fitting?
Yes, in most rooms. A TRV shuts the radiator down once the room reaches the temperature you set, so bedrooms and spare rooms are not heated to the same level as the living room. Keep one radiator without a TRV, usually where the room thermostat is, so the boiler always has somewhere to send heat.
How far is Southend-on-Sea from you?
Southend-on-Sea is 10.7 miles from our base in Bowers Gifford, about 20 minutes by van. Same-day emergency cover and typical arrival in about 20 minutes.
Other services in Southend-on-Sea
- Power Flushing
- Central Heating Installation
- Central Heating Repairs
- Smart Thermostats and Heating Controls
- Hot Water Cylinders and Tanks
- Underfloor Heating
- All services in Southend-on-Sea
Radiators and Radiator Valves near Southend-on-Sea
See the full Radiators and Radiator Valves page for everything we cover across Essex.
