24-hour emergency line, 7 days a week 4.9 from 75 Google reviews
Gas pipework and pressure gauge
Gas Safe Registered Engineers · Rayleigh, Rochford

Gas Pipework and Gas Leaks in Rayleigh

Gas Safe registered engineers about 10 minutes from Rayleigh. Same-day emergency cover and typical arrival in about 10 minutes.

Call-out from £90, emergencies from £120Written quote before any work starts
  • 5.1 miles from our Bowers Gifford base
  • about 10 minutes by van
  • Gas Safe 925538

Whether it is a suspected leak or a new gas point, our engineers reach Rayleigh in about 10 minutes. Around 85% of local homes have a gas supply, which is typical for the Rochford area. The very hard water at 318 ppm will not affect the gas pipe, but it does affect the boiler at the end of it.

Gas pipework work covers new supply runs for a cooker, hob, boiler or fire, extending or moving an existing supply, upgrading undersized pipe so a new combi gets the gas it needs, tracing and repairing leaks, and reconnecting a supply the emergency service has capped. All of it must be done by a Gas Safe registered engineer.

For a leak, we start with a tightness test on the whole installation, trace the escape with gas detection equipment, repair or renew the faulty section, then re-test and purge before putting the appliances back on. For new runs we plan the route, size the pipe for the appliances on it, install it in copper, test it and record the results.

We have installed and repaired gas pipework in Essex homes for over 40 years and are Gas Safe registered (925538). Call-out starts from £90 for planned work and from £120 for emergencies, and you get a written record of every test.

Rayleigh at a glance
Drive from base
5.1 miabout 10 minutes
Homes on mains gas
85%2021 Census
Water hardness
318 ppmVery hard water
Gas Pipework and Leaks
From £90Price agreed first

Gas Pipework and Gas Leaks in Rayleigh: the local picture

85% of the 11,177 households around Rayleigh heat with mains gas only, 5% are electric only (2021 Census, ward level).

Water in the Rayleigh area is very hard at around 318 ppm, so limescale in boilers, cylinders and showers is a common cause of faults here.

Rayleigh is 5.1 miles from our base in Bowers Gifford, about 10 minutes by van.

What is included

  • Gas tightness test on the whole installation
  • Leak tracing with gas detection equipment
  • Repair or renewal of leaking sections
  • New gas runs for cookers, hobs, boilers and fires
  • Upsizing undersized pipework for a new combi boiler
  • Pipework for a relocated boiler or cooker
  • Capping off unused gas points
  • Written record of the test results

How it works

  1. Call us, or 0800 111 999 first if you can smell gas
  2. Test the installation for tightness
  3. Trace the fault or plan the new run
  4. Repair, renew or install the pipework
  5. Re-test, purge and put the appliances back into service

Recent work

Boiler service and flue check
Boiler service and flue check
New pipework and magnetic filter
New pipework and magnetic filter
Baxi combi boiler installation in Benfleet
Baxi combi boiler installation in Benfleet
Bathroom installation with walk-in shower
Bathroom installation with walk-in shower

What Rayleigh customers say

Joshua FoxGoogle review
★★★★★

Essex Heating Engineers installed a new boiler for me in Rayleigh, and they were excellent from start to finish. The team was punctual, tidy, and really professional. The installation was quick, everything was explained clearly, and the new boiler works per...

Verified Google review
Darren DeaconGoogle review
★★★★★

Ash arrived on time, gave us his advice and explained how we should proceed. His quote was reasonable and when we get his email we will arrange a time for the installation of a new thermostat. They covered our floors, so they didn't track anything in. They ...

Verified Google review
Jack CoreyGoogle review
★★★★★

Essex Heating Engineers is my go-to company. They always do a great job. Dean was especially knowledgeable, efficient and dedicated. Getting my house back in working order after a leak in the upstairs bath was problematical, to say the least. But Dean did w...

Verified Google review

4.9 ★★★★★ from 75 Google reviews   Read them all on Google

Questions about gas pipework and gas leaks in Rayleigh

How much does gas pipework cost?

Call-out for planned work starts from £90 and emergency call-out from £120. New runs and repairs are priced on the length and route of the pipe, so we quote after seeing the job, and before starting. A gas cooker or hob connection on an existing supply is £120.

How quickly can you come out for a gas leak?

Call 0800 111 999 first so the supply is made safe, then call us on 01268 855605. The emergency line runs 24 hours a day and the engineer will give you an arrival time based on where you are in Essex. For planned pipework, we book a date that suits you.

How do I know if I have a gas leak?

The usual sign is the smell, which the gas network adds so that leaks are noticed. A meter that keeps turning with every appliance off, or dead grass along the route of a buried pipe, can also point to a leak. If in doubt, turn off at the meter and call 0800 111 999.

My gas has been capped. Can you reconnect it?

Yes. The emergency service caps a supply to make it safe and leaves a notice explaining why. We find and repair the fault, test the whole installation and reconnect it. Any appliance that caused the problem is repaired or replaced at the same time.

How far is Rayleigh from you?

Rayleigh is 5.1 miles from our base in Bowers Gifford, about 10 minutes by van. Same-day emergency cover and typical arrival in about 10 minutes.

Other services in Rayleigh

Gas Pipework and Gas Leaks near Rayleigh

See the full Gas Pipework and Gas Leaks page for everything we cover across Essex.

Need a heating engineer or plumber today?

Family-run, Gas Safe registered and based in Basildon. Call us, message us on WhatsApp, or send a quote request and we will ring you back.

Call now WhatsApp us
Web Design By UKBox
UKBox Logo

Close Button

Web Design By UKBOX