Marks Tey is around 35 minutes from our base, so an engineer can usually diagnose and repair a boiler in one visit with the parts on the van. Mains gas heats 60% of Marks Tey homes, and the hard water across the Colchester area means limescale is behind many of the pressure and hot water faults we fix here, water here averages 288 ppm.
A boiler that will not fire, keeps losing pressure, shows a fault code or leaves you with lukewarm water usually needs a repair rather than a replacement. We repair gas boilers of all ages and makes across Essex, including Baxi, Worcester Bosch, Vaillant, Ideal and Glow-worm.
The engineer diagnoses the fault first and tells you what it is, what it costs to fix and whether the boiler is worth repairing. Common parts such as fans, pumps, diverter valves, PCBs and pressure relief valves are carried on the van, and if a part has to be ordered we tell you when it will arrive and leave the boiler safe in the meantime.
We are Gas Safe registered (925538) and have been repairing boilers in Essex for more than 40 years, so we know the faults each model is prone to. Call-out starts from £90 and the repair price is agreed before we start.
- Drive from base
- 30.1 miaround 35 minutes
- Homes on mains gas
- 60%2021 Census
- Water hardness
- 288 ppmHard water
- Boiler Repair
- From £90Price agreed first
Boiler Repair in Marks Tey: the local picture
60% of the 4,394 households around Marks Tey heat with mains gas only, 6% are electric only and 19.4% run on oil (2021 Census, ward level).
Water in the Marks Tey area is hard at around 288 ppm, so limescale in boilers, cylinders and showers is a common cause of faults here.
Marks Tey is 30.1 miles from our base in Bowers Gifford, around 35 minutes by van.
What is included
- Fault diagnosis by a Gas Safe registered engineer
- Plain explanation of the fault and the repair cost
- Common parts carried on the van
- Fans, pumps, PCBs, diverter valves, thermostats and sensors
- Pressure loss and leak investigation
- Repressurising and bleeding the system
- Safety check after the repair
- Honest advice if replacement makes more sense
How it works
- Call us and describe the fault, including any code on the display
- Diagnose the fault at your home
- Agree the repair price before any work starts
- Fit the part and test the boiler on heating and hot water
- Check for safety and leave the system running
Recent work
What Marks Tey customers say
Joshua FoxGoogle review★★★★★Essex Heating Engineers installed a new boiler for me in Rayleigh, and they were excellent from start to finish. The team was punctual, tidy, and really professional. The installation was quick, everything was explained clearly, and the new boiler works per...
Darren DeaconGoogle review★★★★★Ash arrived on time, gave us his advice and explained how we should proceed. His quote was reasonable and when we get his email we will arrange a time for the installation of a new thermostat. They covered our floors, so they didn't track anything in. They ...
Jack CoreyGoogle review★★★★★Essex Heating Engineers is my go-to company. They always do a great job. Dean was especially knowledgeable, efficient and dedicated. Getting my house back in working order after a leak in the upstairs bath was problematical, to say the least. But Dean did w...
Questions about boiler repair in Marks Tey
How much does a boiler repair cost?
Call-out starts from £90, which covers the engineer's visit and diagnosis. Once we know the fault we give you a price for the repair including parts, and nothing is fitted until you have agreed it. If the boiler is old and the repair is not worth doing, we say so.
How quickly can an engineer come out?
Call 01268 855605 and we will tell you when the next engineer can be with you. If you have no heating or hot water we treat the job as a priority, and our emergency line runs 24 hours a day for breakdowns that cannot wait.
My boiler is showing a fault code. What does it mean?
Each manufacturer uses its own codes. On a Baxi, Worcester Bosch, Vaillant, Ideal or Glow-worm boiler the code usually points to a lockout from low pressure, ignition failure, a flue fault or an overheat. Tell us the code when you call and the engineer will arrive with the likely part on the van.
Why does my boiler keep losing pressure?
Pressure loss means water is leaving the sealed system somewhere. The usual causes are a weeping radiator valve, a failed expansion vessel, a passing pressure relief valve or a leak in the pipework. Topping up masks the problem, so we trace the cause and fix it.
How far is Marks Tey from you?
Marks Tey is 30.1 miles from our base in Bowers Gifford, around 35 minutes by van. Next-day appointments for repairs and installs, and emergencies as availability allows. Typical drive time around 35 minutes.
Other services in Marks Tey
- Boiler Installation and Replacement
- Emergency Boiler Repair 24/7
- Boiler Servicing
- Power Flushing
- All services in Marks Tey
Boiler Repair near Marks Tey
See the full Boiler Repair page for everything we cover across Essex.
