We connect gas cookers and hobs in Hadleigh for £120, about 10 minutes from our base in Bowers Gifford. Around 79% of homes in the Castle Point area have a mains gas supply, so a bayonet is usually already in the kitchen. The very hard water here (318 ppm) does not affect a cooker, but ask about it if your boiler is scaling up.
Connecting a gas cooker, range or built-in hob is work that must be done by a Gas Safe registered engineer. Retailers deliver the appliance but most will not connect it, which is where we come in. We fit freestanding cookers, range cookers and built-in hobs across Essex for a fixed £120.
The engineer disconnects and removes the old appliance, fits a new bayonet connection where one is needed, connects the new cooker with a new hose or the hob with a rigid connection, fits the stability bracket or chain on a freestanding cooker, tests the installation for tightness, checks every burner and carries out a gas safety check on the appliance.
The £120 price includes the bayonet, the cooker hose and the gas safety check. If the gas supply needs extending to a new position, that is priced separately after we have seen the run. We are Gas Safe registered (925538) and family run.
- Drive from base
- 3.9 miabout 10 minutes
- Homes on mains gas
- 79%2021 Census
- Water hardness
- 318 ppmVery hard water
- Gas Cooker Installation
- £120 fittedPrice agreed first
Gas Cooker and Hob Installation in Hadleigh: the local picture
79% of the 3,112 households around Hadleigh heat with mains gas only, 12% are electric only (2021 Census, ward level).
Water in the Hadleigh area is very hard at around 318 ppm, so limescale in boilers, cylinders and showers is a common cause of faults here.
Hadleigh is 3.9 miles from our base in Bowers Gifford, about 10 minutes by van.
What is included
- Disconnection and removal of the old cooker or hob
- New bayonet fitting where needed
- New cooker hose or rigid hob connection
- Stability bracket or chain on a freestanding cooker
- Gas tightness test and burner check
- Gas safety check on the new appliance
- Appliance tested and left working
How it works
- Buy the cooker or hob you want, or ask us what will fit
- Book a time on 01268 855605
- Disconnect the old appliance and connect the new one
- Test for tightness and check every burner
- Leave you with a working cooker and the paperwork
Recent work
What Hadleigh customers say
Joshua FoxGoogle review★★★★★Essex Heating Engineers installed a new boiler for me in Rayleigh, and they were excellent from start to finish. The team was punctual, tidy, and really professional. The installation was quick, everything was explained clearly, and the new boiler works per...
Darren DeaconGoogle review★★★★★Ash arrived on time, gave us his advice and explained how we should proceed. His quote was reasonable and when we get his email we will arrange a time for the installation of a new thermostat. They covered our floors, so they didn't track anything in. They ...
Jack CoreyGoogle review★★★★★Essex Heating Engineers is my go-to company. They always do a great job. Dean was especially knowledgeable, efficient and dedicated. Getting my house back in working order after a leak in the upstairs bath was problematical, to say the least. But Dean did w...
Questions about gas cooker and hob installation in Hadleigh
How much does it cost to install a gas cooker?
£120, which includes the bayonet fitting, the cooker hose and a gas safety check on the appliance. The same price applies to a built-in hob. Extending or moving the gas supply is extra and quoted once we have seen the run.
How quickly can you fit it?
Call 01268 855605 once you know the delivery date and we will book the connection for the earliest time that suits you. If the cooker has already arrived and you have nothing to cook on, say so and we will fit you in as a priority.
Can I connect a gas cooker myself?
No. It is illegal for anyone who is not Gas Safe registered to connect a gas appliance, and an incorrect connection can leak gas or make the appliance unsafe to use. Retailers and insurers will ask for evidence that the work was done by a registered engineer.
Do you supply the cooker or hob?
We normally fit the appliance you have bought. If you would like us to source one, ask when you call and we will tell you what we can do. Either way, check the appliance is suitable for natural gas before it is delivered.
How far is Hadleigh from you?
Hadleigh is 3.9 miles from our base in Bowers Gifford, about 10 minutes by van. Same-day emergency cover and typical arrival in about 10 minutes.
Other services in Hadleigh
- Emergency Gas Engineer 24/7
- Landlord Gas Safety Certificates (CP12)
- Gas Pipework and Gas Leaks
- Fixed-Price Plumbing Jobs
- All services in Hadleigh
Gas Cooker and Hob Installation near Hadleigh
See the full Gas Cooker and Hob Installation page for everything we cover across Essex.
