A bathroom refit in Boreham starts with a survey of the pipework and the water pressure, as it does everywhere in the Chelmsford area. We are about 20 minutes away. The two local factors we plan around are the very hard water at 360 ppm and the gas combi or cylinder that heats the water in 62% of homes.
A new bathroom is a plumbing job first. Where the waste runs, whether the shower has enough pressure, how the hot water reaches the far end of the house and where the towel rail connects to the heating all decide whether the finished room works. We fit bathrooms, en suites and shower rooms across Essex, from a like-for-like replacement to a full refit with the room re-planned.
We survey the room and the existing services, plan the layout with you, quote in writing and then do all the plumbing: hot and cold supplies, wastes and soil pipe, bath, shower, toilet, basin, towel rail and any pipework alterations. We work alongside your tiler and electrician, or can recommend trades we have worked with, and we test every outlet before the room is handed back.
Because we are heating engineers as well as plumbers, we sort out the water pressure, the cylinder or combi capacity and the towel rail connection at the same time. Essex water is hard to very hard, so we also talk about limescale protection for the new shower. Quoted after a free survey.
- Drive from base
- 16.2 miabout 20 minutes
- Homes on mains gas
- 62%2021 Census
- Water hardness
- 360 ppmVery hard water
- Bathroom Installation
- Free surveyPrice agreed first
Bathroom Installation in Boreham: the local picture
62% of the 2,754 households around Boreham heat with mains gas only, 12% are electric only and 13.5% run on oil (2021 Census, ward level).
Water in the Boreham area is very hard at around 360 ppm, so limescale in boilers, cylinders and showers is a common cause of faults here.
Boreham is 16.2 miles from our base in Bowers Gifford, about 20 minutes by van.
What is included
- Survey and layout planning
- Hot and cold supply pipework
- Wastes, traps and soil pipe connections
- Bath, shower, toilet and basin installation
- Shower pumps, mixer valves and thermostatic showers
- Heated towel rails connected to the heating
- Water pressure and hot water capacity check
- Testing of every outlet before handover
How it works
- Survey the room and the existing pipework
- Plan the layout with you and quote in writing
- Strip out and run the new pipework and wastes
- Fit the sanitaryware and towel rail after tiling
- Test every outlet and hand over
Recent work
What Boreham customers say
Joshua FoxGoogle review★★★★★Essex Heating Engineers installed a new boiler for me in Rayleigh, and they were excellent from start to finish. The team was punctual, tidy, and really professional. The installation was quick, everything was explained clearly, and the new boiler works per...
Darren DeaconGoogle review★★★★★Ash arrived on time, gave us his advice and explained how we should proceed. His quote was reasonable and when we get his email we will arrange a time for the installation of a new thermostat. They covered our floors, so they didn't track anything in. They ...
Jack CoreyGoogle review★★★★★Essex Heating Engineers is my go-to company. They always do a great job. Dean was especially knowledgeable, efficient and dedicated. Getting my house back in working order after a leak in the upstairs bath was problematical, to say the least. But Dean did w...
Questions about bathroom installation in Boreham
How much does a new bathroom cost?
It depends on the layout, whether the sanitaryware stays in the same positions, the quality of the fittings and how much pipework changes, so we quote after a free survey. A like-for-like swap is the cheapest option; moving the toilet or shower costs more because the waste and soil pipe have to move with it.
How quickly can you start?
Call 01268 855605 and we will book the survey. A start date is agreed when you accept the quote and the fittings are on order, and the engineer will tell you how long your bathroom will take when they have seen the room and the plan.
Do you supply the bathroom suite?
We fit suites you have chosen from a retailer or showroom, and we can advise on what will work with your water pressure and pipework before you buy. If you would like us to source the fittings, ask and we will tell you what we can do.
Will my shower have enough pressure?
That depends on whether you have a combi, a gravity-fed cylinder or an unvented cylinder, and on your mains pressure. We measure it during the survey. A gravity system may need a shower pump, and a combi needs a shower matched to its flow rate. We tell you before you buy the shower.
How far is Boreham from you?
Boreham is 16.2 miles from our base in Bowers Gifford, about 20 minutes by van. Same-day emergency cover and typical arrival in about 20 minutes.
Other services in Boreham
- Radiators and Radiator Valves
- Emergency Plumber 24/7
- Plumbing Repairs and Leak Detection
- Fixed-Price Plumbing Jobs
- Water Softeners and Limescale Protection
- All services in Boreham
Bathroom Installation near Boreham
See the full Bathroom Installation page for everything we cover across Essex.
